Factory direct 4WE6D6X / EG24NZ5L 4WE6Y6X / EG24NZ5L solenoid valve[Because of standard models are different, so the price is not the same, and therefore subject to consultation consultation]
Jiangnan hydraulic integrity of operating all types of hydraulic components Hydraulic valve · Solenoid valve · · · relief manual valve · Pressure gauge switch, there are Shanghai joint design type series, Rexroth Series, Yuken series, Vickers series hydraulic valves, hydraulic pumps, hydraulic motors.
Complete the following parameter table specifications, reliable quality, factory three bags, welcomed the new and old friends advice · Order! 13857328300 0573-86811017 Fax: 0573-86815488 Liu
4WE type directional control valves are solenoid controlled reversing slide valve for controlling the fluid opening. Stop and direction. This directional control valve includes a valve body. One or two solenoids, control spool and one or two return springs. In the non-energized state. Control spool return spring is held in the neutral or initial position. Control spool is operated by wet solenoid.
Solenoid valve variety, according to their number and the number of operating positions the number of paths can be divided into two-way, two-way, three-way, etc; their reduction and positioning can be divided into spring return, steel ball positioning, without reset spring; their connection form the solenoid valve can be divided into flanged and threaded connection; in the form of its structure with the electromagnet can be divided into dry and wet, for each category another AC, DC, this whole form, but there are a good variety of required power supply voltage, and thus there are many differences in their structure.
1. Press the number of interfaces and the number of switching positions Category
Interface refers to the various access pipeline valve inlet and outlet, the inlet is usually standard is P, the return port is marked as R or T, the oil port places A, B to represent. Movable within the valve spool position number called switching position number, usually we will interface is called "on", the spool position is called "bits." Thus, according to the amount of work and the number of paths Positions can be divided into two-way, two-way, three-way, etc.2. Classification by mode of operation
Driving force behind moving the spool valve has hands, feet, mechanical, hydraulic, electromagnetic and other methods.
3. Reset and their positioning in the form of classification
It can be divided into spring return, steel ball positioning, no reset spring.
4. The form of their connection to the solenoid valve classification
It can be divided into flanged and threaded connections.
5. The form of the structure of their classification with electromagnet
It can be divided into dry and wet.